16 channel video multiplexer digital video converter FC to BNC connecter over single fiber

1.many years experience fiber to video 2.three years Warranty 3. could contact with voice/internet/pc/speaker

Video optical transceiver/video optical converter/fiber optic converter/video optical transmitter/video fiber converter/video fiber transmitter /video optical multiplexer/video fiber multiplexer/video optical mux/video fiber mux/video optical fiber converter/video optical fiber equipment/video optical fiber multiplexer/video fiber optic equipment/video digital optical converter/Video Fiber Optic Converter/fiber optic audio converter/audio digit optical converter/rs232/485/422 fiber optic converter/video to fiber/fiber to videoProduct

Product introduction

1-64 channel digital video optical transceiver,which can transmit high quality composite video in one core optical fiber .1-64 channel forward audio or 1-8 channel bidirection audio,1-4 channel forward,bidirection asynchronous data or 1 channel 10M/100M auto-adapt ethernet signal.

This series video optical transceiver adopt all-digital without compression technology ,they can support any high-resolution movement ,transmission of high-quality still images.

This series digital video optical transceiver are widely used in security monitoring,high ways,E-policeman ,automation,toll station video surveillance system ,industrial closed circuit television surveillance,high quality video conference ,smart dwelling district,etc.

Application

Product featrues

1.all-digital without compression

2.3 level lighting proof

3.industrial grade design,high reliability ,surface mount technology

4.Full compatible withPAL/NTSC/SECAM ,good transmitted quality

5.video quality has nothing to do with the transmission distance within the allowable range of optical power

6.support paralled transporting of video,data ,audio,switching capacity ,ethernet ,single derection or biderection ,optional

7.support any high resolution video

8.supporrt video transmit to another perfectly

9.support RS232/RS485/RS422 or manchester code

10.independent intellectual property rights,large scale application specific integrated circuit core

11.single fiber transmission ,also can choose dual fiber

12.desktop,wall-hung,19 inch 1Urack ,optional

13.support for customization and OEM mode

Technical parameters

Optical fiber interface parameters

1.wave length :single mode 1310nm/1550nm,multi mode 850nm/1310nm

2.fiber counts : transceiving double core ,transceiving single core

3.transmission power : -9dBm/ -5dBm

4.transfer-length : 0-50 kilometers/100 kilometers

5.receiver sensitivity: superior to -36dBm

6.connector :SC/FC/ST optional

Audio interface parameters

1.bandwidth per channel :20Hz-20KHz

2.sampling rate :96KHz

3.quantitative rate: 24bit

4.input impedance :47KΩ unbalance

5.output impedance :10KΩunbalance

6.norminal input and output level :2Vp-p

7.non-equilibrium weighted signal to noise ratio: 75dB (Typical value)

8.total harmonic distortion : 0.1%(Typical value)

9.characteristic : to be completed by a single channel or dual channel,high quality sound effect

Ethernet data interface parameter

1.speed :10Mor 10/100Mauto-adapt

2.protocal : support IEEE802.3,IEE802.1Q(VLAN)

3.physical interface : RJ45,support auto-MDIX

4.operating mode : full-duplex ,half-duplex ,auto-adapt

switching capacity interface parameters

1.response time : <0.5ms

2.switching interface : optical MOS electric relay 350v/120Ma

3.physical interface : RJ45 video

Telephone interface parameters

1.wideband speech :8KHz

2.function : support fax and CID (caller identification)

video interface parameters

1.signal system : PAL/NTSC/ SECAM

2.norminal input and output level:1VP-P

3.norminal input and output impedance : 75Ω

4.Bandwidth per channel : 8MHz

5.sampling frequency

6.video signal to noise ratio : S/N>67db

asynchronous data interface parameters

1.speed: 300-115.2kbps auto-adapt

2.RS485: 0-19.2 kbps

3.RS485: 0-19.2 kbps

4.interface characteristic : satisfied the standard of ITU-TV.24

5.connector :connecting terminal or RJ45

6.connection type : DCE

7.characteristics :You can choose different types of data interface ,or all of these together ,including RS232,RS485,RS422

Power

1.220VAC,-48VDC optional

2.total power consumption 25W (single-terminal )

3.type : 19 inch desktop

4.dimensions : wall-hung ,standard IU/4U

Enviroment condition

1.operating temperature :-25 degree-+70 degree

2.storage temperature :-40 degree--+80 degree

3.relative humidity: 0-95% (non condensing )

16 channel video multiplexer digital video converter FC to BNC connecter over single fiber